Cloud II

Cloud II

Articles - Category Page

(9)
H
Cloud II (Xbox® One) Usage

Usage (Xbox® One) To use the HyperX Cloud II headset with Xbox® One, you will need the Xbox One adapter (sold separately) that plugs into the Xbox® One controller (pictured below.) Because this adapter has built-in volume controls, you will remove the USB control box (that came with your HyperX Clou

Knowledge Base Article

 • 

Cloud II

H
Cloud II Usage with Mobile Devices (Phone or Tablet)

Usage with Mobile Device (Phone or Tablet) To use the HyperX Cloud II headset with a mobile device, unplug the USB control box and plug the 3.5mm headset jack directly into the audio jack on your phone or tablet.

Knowledge Base Article

 • 

Cloud II

H
Cloud II (PlayStation® 4) Usage

Usage (PlayStation® 4) For optimal use with PlayStation® 4 (PS4®), unplug the headset jack from the USB control box and connect audio jack on the headset directly to the PS4 game controller and follow these steps: 1. Turn on your PS4® game console. 2. Navigate to the Settings Menu and select it. 3.

Knowledge Base Article

 • 

Cloud II

H
Cloud II Usage Direct Connect without Control Box

Usage (Direct Connect) with No Control Box Connect your headset directly to your computer, game console, or another device (phone or tablet) that has a 3.5mm audio jack.

Knowledge Base Article

 • 

Cloud II

H
Cloud II User Manual

Cloud II User Manual

Knowledge Base Article

 • 

Cloud II

H
Cloud II with USB Control Box Setup

Usage (with Control Box) Connect the headset’s 3.5mm audio jack to the input jack on the USB control box. The USB control box then connects to a computer using the USB connector on the end of the control box. To ensure that HyperX Cloud II is the default audio device, you must follow these instructi

Knowledge Base Article

 • 

Cloud II

H
Cloud II Overview

Cloud II Overview ​ A. Leatherette Headband w/ HyperX Logo B. Aluminuk Arm to Adjust Headband C. Attached Cable w/3.5mm input jack D. Detachable Microphone with Adjustable Arm and Condenser E. 3.5mm Audio Input Jack F. Extra Set of Ear Cushions G. Control Box Cable w/ USB Connector and Control Box H

Knowledge Base Article

 • 

Cloud II

H
Cloud II Specifications

Technical Specifications ​ Headset • Transducer type: Dynamic 53mm with Neodynium Magnets • Operating principle: Closed • Frequency response: 15Hz-25KHz (earphones) • Nominal impedance: 60 ohm per system • Nominal SPL: 98+/-3dB • T.H.D: < 2% • Power handling capacity: 150mW • Sound coupling to the e

Knowledge Base Article

 • 

Cloud II

H
Cloud II Firmware Update

cloud ii firmware update

Knowledge Base Article

 • 

Cloud II