Cloud Orbit

Cloud Orbit

Articles - Category Page

(16)
H
Cloud Orbit Charging the Headset

Charging the Headset When the charging cable is connected the LED will indicate the status. Status LED LED solid red > Charging LED off > Fully charged “Battery low” voice prompt plays at 15% battery. To disable USB charging, hold down the headphone volume wheel for 2 seconds.

Knowledge Base Article

 • 

Cloud Orbit

H
Cloud Orbit PC USB Setup

PC USB Setup 1. Power on the headset. 2. Connect the headset to the PC with the USB Type-C to USB Type-A cable. 3. Right click speaker icon > Select Open Sound settings > Select Sound control panel 4. Under Playback tab, click on “HyperX Cloud Orbit” and click on Set Default. 5. Under Recording tab,

Knowledge Base Article

 • 

Cloud Orbit

H
Why is my Cloud Orbit battery not charging even though it is connected to my computer’s USB port?

The USB port the headset is plugged into may not be supplying enough power. Additionally, some PC USB ports may not supply power in "sleep mode" and/or other power-saving modes. Lastly, if the USB charging mode is disabled on the Cloud Orbit, the headset will not charge through USB until the headset

Knowledge Base Article

 • 

Cloud Orbit

H
Cloud Orbit PlayStation 4 USB Setup

PlayStation 4 USB Setup 1. Power on the headset. 2. Hold down the microphone volume wheel for 2 seconds to change audio modes. Repeat this step until the headset plays the voice prompt “2 Channel”. 3. Connect the headset to the PlayStation 4 console with the USB Type-C to USB Type-A cable. 4. From t

Knowledge Base Article

 • 

Cloud Orbit

H
Cloud Orbit Overview

A. Microphone mute B. Status LED C. Power button D. 3D button E. Microphone port F. USB Type-C port G. 3.5mm port H. Microphone volume wheel I. Headphone volume wheel J. Detachable boom microphone K. USB Type-C to USB Type-A cable L. USB Type-C to USB Type-C cab M. 3.5mm cable (4 pole)

Knowledge Base Article

 • 

Cloud Orbit

H
Cloud Orbit User Manual

Cloud Orbit User Manual

Knowledge Base Article

 • 

Cloud Orbit

H
Does the Orbit software work on MacOS?

The Cloud Orbit software is only compatible with Windows OS.

Knowledge Base Article

 • 

Cloud Orbit

H
Cloud Orbit Specifications

Cloud Orbit Specifications Headphone Driver: Planar transducer, 100 mm Type: Circumaural, Closed back Frequency response: 10Hz–50,000Hz Sound pressure level: >120 dB T.H.D.: < 0.1% (1 kHz, 1 mW) Weight: 368g Cable length: USB Type-C to USB Type-A: 3m USB Type-C to USB Type-C: 1.5m 3.5mm plug (4-pole

Knowledge Base Article

 • 

Cloud Orbit

H
Cloud Orbit Analog 3.5mm Mode

Cloud Orbit Analog 3.5mm Mode 1. Power on the headset 2. Connect the headset to the device’s 3.5mm port with the 3.5mm (4-pole) cable

Knowledge Base Article

 • 

Cloud Orbit

H
Cloud Orbit EQ Presets

EQ Presets Short press and scroll the microphone volume wheel up or down to change the EQ preset. A voice prompt will tell you which EQ preset the headset is using. Default - Tuned to the Audeze House curve. Foot Steps - Enhances sounds of footsteps. Ballistics - Enhances gunshots and other ballisti

Knowledge Base Article

 • 

Cloud Orbit