DuoCast

DuoCast

Articles - Category Page

(10)
H
HyperX DuoCast Factory Reset

If you are experiencing any issues, we recommend trying to Factory Reset the microphone. Hold the tap-to-mute sensor and the multifunction button until the LED ring flashes red for about 8 seconds. This will indicate the reset was successful.

Knowledge Base Article

 • 

DuoCast

H
HyperX DuoCast PC and PlayStation 5 Setup

​​ PC Setup Connect the microphone to a USB port on the PC or Mac with the included USB cable Windows To ensure the microphone is configured correctly on the PC, follow the steps below: Right-click on the sound icon on the system tray and select Sounds. On the Playback tab, select Speakers HyperX Du

Knowledge Base Article

 • 

DuoCast

H
HyperX DuoCast Polar Patterns

​​ Push the multifunction button to switch between the microphone’s two polar patterns, indicated by the LED ring. LED Ring - Full to Front - Cardioid LED Ring Front to Full - Omnidirectional

Knowledge Base Article

 • 

DuoCast

H
HyperX DuoCast Microphone Monitoring On/Off

To turn microphone monitoring on/off, press and hold the multifunction button and tap the tap-to-mute sensor.

Knowledge Base Article

 • 

DuoCast

H
HyperX DuoCast Installing the Mount Adapter

Remove both the thumb screw and nut from the microphone stand. Remove the microphone stand from the microphone. Align the mount adapter with the microphone mount holes and secure the adapter with the thumb screw and nut.

Knowledge Base Article

 • 

DuoCast

H
HyperX DuoCast Quick Start Guide

DuoCast Quick Start Guide

Knowledge Base Article

 • 

DuoCast

H
HyperX DuoCast Headset Setup

​ Connect headphones to the headphone jack on the microphone for microphone monitoring and playback audio.

Knowledge Base Article

 • 

DuoCast

H
HyperX DuoCast Firmware Update

Notes: Improved brightness level and behavior of certain light effects DuoCast Firmware Updater Version 4109 6113

Knowledge Base Article

 • 

DuoCast

H
HyperX DuoCast Mic Mute

​​ Tap the tap-to-mute sensor to mute/unmute the microphone. The LED ring will toggle to indicate the change in mute status.

Knowledge Base Article

 • 

DuoCast

H
HyperX DuoCast Overview

A. Tap-to-Mute Sensor B. LED Ring C. Gain Control Knob D. Multifunction Button E. Headphone Output F. USB-C Port G. USB-C to USB-A Cable H. Mount Adapter (Supports both 3/8" and 5/8" thread sizes)

Knowledge Base Article

 • 

DuoCast