Cloud Alpha 2 Wireless - Pairing to Base Station

1. While the headset is powered off, hold down the power button for about 10 seconds until the headset status LED starts blinking white rapidly. The headset is now in pairing mode.

2. While the base station is plugged in and the base station output mode switch is set to headset, hold the top 3 buttons below the base station volume wheel for 10 seconds until the LEDs start blinking white rapidly. The base station is now in pairing mode.

3. Wait until both the headset LED and the base station LEDs are solid. The headset and base station should now be paired together.