บทความฐานความรู้
Using Xbox One® 1. Connect the wireless adapter to a USB port on the Xbox One® system. 2. Power on the headset. 3. When the wireless adapter status light is solid, the headset is now connected to the adapter. 4. If logged in with an account, the Xbox One® will assign the headset to that account and
Knowledge Base Article
•
CloudX Flight
Headset Controls Power button Hold the power button for 3 seconds to power on/off the headset. With the headset powered on, short press the power button to cycle through the ear cup LED modes. The supported LED modes are solid (default), breathing, and off. Volume wheel Rotate the volume wheel up or
Headset Charging When the headset is connected to a charger with the USB charge cable, the ear cup LEDs will indicate the charge status.
Specifications Headphone Driver: Dynamic, 50mm with neodymium magnets Type: Circumaural, Closed back Frequency response: 20Hz–20,000Hz Impedance: 32 Ω Sound pressure level: 113dBSPL/mW at 1kHz T.H.D.: < 2% Weight: 288g Weight with mic: 298g Cable length and type: USB charge cable (1m) Microphone Ele
Manually Pairing Headset and Wireless Adapter The headset and wireless adapter are already paired together for first-time use. If manual pairing is necessary, follow the steps below to pair the headset and wireless adapter together. 1. Make sure the headset is powered off. 2. Plug the USB wireless a
To enable/disable mic monitoring on HyperX CloudX Flight, press and hold the Microphone Mute button for 3 seconds.
CloudX Flight User Manual
CloudX Flight Headset Status Beep Tone Indicators The headset will emit beep tones to indicate status for power, volume, game/chat balance, microphone mute, mic monitoring, and battery charge.
Overview A. Game balance button B. Chat balance button C. Microphone mute button D. Ear cup LED E. USB charge port F. Power button G. Microphone port H. Volume wheel I. Detachable microphone J. Microphone mute LED K. Wireless adapter L. Wireless status light M. USB charge cable
