Articoli della base di conoscenza
HyperX Clutch Wireless Gaming Controller Quick Start Guide
Knowledge Base Article
•
Clutch Wireless Gaming Controller
Before first trying to use the controller, please charge it to full. Plug the controller into a USB power source using the provided USB-C to USB-A cable. The LED status bar will indicate charge level, lighting up progressively more as the battery charges to full.
To connect directly via USB cable (also good for charging at the same time), please connect the controller to the host system using the provided USB-C to USB-A cable and swap it to the cable mode, indicated by the USB symbol. To connect to the 2.4GHz wireless adapter, swap the controller to the 2
Calibration Calibration can address issues related to analog sticks and triggers. To activate calibration mode: Set the mode selection switch to USB. Hold down Start and Select. While still holding down both buttons from the previous step, plug in the USB-C cable. Continue holding down both buttons
Turbo Turbo can be assigned to individual buttons to emulate repeated button presses. After setting Turbo, press and hold the desired button. Turbo can only be assigned to L3, R3, A, B, X, Y, LT, RT, LB, RB and D-Pad.
Pairing and Connecting The controller must be powered off before attempting to enter pairing mode. 2.4G 1. Set the mode selection switch to 2.4G. 2. Connect the 2.4GHz wireless adapter to the PC. 3. Tap the Home button. The controller will power on and attempt to connect to the 2.4GHz wireless ad
Reset The controller can be manually power cycled by pressing the pinhole button on the rear of the controller. Once you've successfully reset the controller, you must calibrate the device.
Controller Specifications Connection type: 2.4GHz Wireless / Bluetooth 4.2 / Wired Compatibility: Android, PC Battery Specifications Battery life Up to 19 hours* Battery capacity 600mAh Physical Specifications Length: 110.3mm** Height: 75.1mm** Width: 155.6mm Mobile clip dimensions; 41mm – 86mm Weig
HyperX Clutch X-Input & DirectInput On PC, the controller supports both X-Input and DirectInput functionality. By factory default, the controller is in X-Input Mode and will save the last Input Mode selected. Switch between X-Input and DirectInput Place the controller in 2.4G or USB mode. Turn on an
To toggle the controller on / off when in 2.4G or Bluetooth mode, press the Home button. The controller will attempt to connect to your device. The controller will automatically shut off after 5 minutes of inactivity. To switch to Handheld mode, attach the mobile clip and insert a phone. Fold